Does your HP Printer disappear? This is how you fix it.

Lauren Writes:

I just bought a new HP printer and installed it using the disc that came in the box. The problem is that every time I turn off or restart the printer it disappears! This is very annoying, what do I do? I called HP and they said it was a problem with Vista and want me to erase everything and reinstall. I really don’t want to do that.

This is an annoying problem indeed. It’s also one that I’ve run into before. Fortunately there is an easy fix.

How to make your HP Printer Stop Disappearing

This problem is caused by a program that HP installs in your computer when you first installed the printer. The program is called “HP CUE DeviceDiscovery Service”. From the name I assume that it’s in charge of detecting HP devices connected to your computer. Unfortunately in some cases it fails to do its job and your devices remain undetected. Bummer.

To fix the problem simply disable HP CUE DeviceDiscovery Service. Follow these simple steps.

startbutton

Click on Start.

services

In the Search field type in Services.msc then press Enter.

listed

The Services Manager will open. Scroll down to where you see HP CUE DeviceDiscovery Service listed.

properties

Right-click on HP CUE DeviceDiscovery Service and click Properties.

startuptype

A Window will open. For Startup type select Disabled.

apply

Click Apply then close the Window. Reboot your computer.

And your printer should be back!

Having problems with your computer? Simply scan your computer for free to identify problem areas and solutions. Click here to start a free scan.

 

What to do when your DVD Drive is not detected.

I was recently asked to install a printer for someone. They had the CD, but I found out the DVD/CD player wasn’t responding. I looked in the device manager and noticed there wasn’t a DVD/CD listed. I tried the add new hardware but it said no new hardware found. It is a Presario F700 laptop with vista. They said the DVD/CD used to work. I’ve never came across this issue before. What is wrong and what should I do? Thanks for your time.

This is most likely caused by an upper/lower filter issue. Simply follow these steps and then reboot your computer.

  1. Open RegEdit (Start>Run> Type “regedit”)
  2. Navigate to “HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}”
  3. Delete the “UpperFilters” value.
  4. Delete the “LowerFilters” value.
  5. Restart the computer.
  6. You might need to uninstall then reinstall any burning software you may have (Nero, iTunes, etc…) do this now.

 

 

How to Fix “The specified I/O operation on \Device\Harddisk\ was not completed before the time-out period expired” error

Ive got the error “The specified I/O operation on \Device\Harddisk\DR0 was not completed before the time-out period expired.” when I plug in my external USB hard drive.

externaldrive

This error can be caused by the following:

Bad USB Port on Your Computer

Your computer may have a defective USB port. I’ve seen many people get this error when using their device either on their front USB port or on a USB Hub with many other USB devices. Simply try plugging in the drive into another USB port (preferably on the back side of your computer not the front) and see if that works.

You can also try plugging the hard drive (or whatever other device you’re having the problem with) into another computer.

Bad Enclosure on the Drive

If your problem is with an external hard drive then you may be the victim of a faulty enclosure (the case that houses the hard drive). In this case you need to either take the drive out and move it to another USB enclosure or make it a secondary internal drive in your computer.

Bad Operating System

Your error may be caused by a corrupted Operating System. The best way to find out if this is the case is to connect the drive to another computer. If it works then you know that it’s a problem with your computer, if it doesn’t then it’s a problem with the drive.

Bad Sectors on the Drive

And finally it could be bad sectors on the drive. To find out use a tool such as HD Tune to scan your hard drive (use the Full option). If you do find bad sectors you will usually need to use a Data Recovery tool to get your data back. After your data is safe try to replace the drive if it’s under warranty or throw it out if it’s not.

Having problems with your computer? Simply scan your computer for free to identify problem areas and solutions. Click here to start a free scan.

 

How to get Windows Vista 64-bit for free!

If anyone out there wishes to upgrade to Windows Vista 64-bit I’ve got some great news for you! Microsoft will ship you a copy of the 64-bit version of Vista for free!

From the Microsoft Site:

32-bit CD
If your system features a CD drive but no DVD drive, you can order Windows Vista on CD-ROM. The installation files span multiple discs, so unattended installations are not possible.

64-bit DVD
If your system features a 64-bit processor, you can take advantage of its advanced design by ordering 64-bit software media. You’ll get the same interface, features, and functions, but you’ll get them in an operating system that takes advantage of access to vastly more memory. All installation files are on a single disc. Please note that 64-bit media is included in the box with the purchase of Windows Vista Ultimate.

The 64-bit version of Windows Vista is not for everyone. Please confirm that your system, applications, and devices are compatible with a 64-bit edition of Windows Vista before installing.

There are some caveats of course:

  1. You’ll need to already own a copy of the 32-bit version of Windows Vista.
  2. You’ll need to pay shipping and handling for the disc.
  3. You’ll need to fill out a form (for real.)

Simply head on over to the Windows Vista Alternate Media site and enter your product key to get started.

Having problems with your computer? Simply scan your computer for free to identify problem areas and solutions. Click here to start a free scan.

 

How to convert NTFS to FAT32

How do you revert an NTFS partition to a FAT32 partition in windows XP (SP2)… Can you only use WinXP or do you need an external software?

Yes you can convert NTFS to FAT32. But before I tell you how I need to ask: Why?

NTFS is the much better file system. Here are some superior features it has over FAT32:

  • FAT32 can only support file sizes up to 4GB while NTFS can go above and beyond.
  • NTFS drives are far less likely to develop errors then FAT32 drives.
  • NTFS supports cluster remapping for bad sectors allowing the Operating System to “mark” bad sectors off limits. This increases the usable lifespan of a Hard Drive.

But if you’re sure you want to convert back to FAT32 read on.

Unfortunately there are really only two ways. You cannot just use Windows XP to convert back to FAT32 like you could to convert to NTFS. Here’s how:

  1. Reformat your computer (saving your data) and reinstall Windows XP using a FAT32 file system.
  2. Or use a product such as Partition Magic from Symantec to convert your existing NTFS installation to FAT32.

Whichever option you choose you’ll want to backup your data. Option 1 will erase your data for sure while Option 2 is a dangerous process so backing everything up is a wise move.

Having other problems with your computer? Simply scan your computer for free to identify problem areas. Click here to start a free scan.

 

How to Remove/Uninstall Norton Internet Security and Norton Antivirus

hey. I’m having trouble with my norton and want to remove it. how do it uninstall it?

If you want to uninstall Norton Internet Security or Norton AntiVirus there are two ways to do it. You can either remove it by using the built in Windows uninstaller or you can use the Norton Removal Tool. I prefer the Removal Tool because it removes Norton completely without leaving traces on your computer.

You can download the removal tool from the Norton Website here: Norton Removal Tool.

Having other problems with your computer? Simply scan your computer for free to identify problem areas. Click here to start a free scan.

 

How to Fix Liquid/Water Damage to a Laptop

I dumped wine all over my laptop, any suggestions? Its been sitting for a few days already.

Ouch! The first thing you want to do (and I hope that you’ve done this already) is to unplug the laptop from any power source including the power cord and the battery. Remove both of those immediately.

When water or any any liquid seeps into electronics that greatest danger comes from it’s internals shorting out. This doesn’t just go for laptops but for cell phones, mp3 players and anything else that has a chip in it.

Now I’m nervous to hear that it’s wine but what I would recommend you do is, as soon as you’ve taken away the power, let the electronic device sit there for a few days and led the liquid evaporate away. After a few days open up the device and see if there are any more droplets of liquid, if not give it a few more days and only then try plugging it back in.

Having other problems with your computer? Simply scan your computer for free to identify problem areas. Click here to start a free scan.

 

How to Remove Nero Scout

How do I remove Nero Scout?

To remove Nero Scout simply do the following:

  1. Click Start.
  2. Click Run (Or in Vista type in “Run” into the search box and click on the Run result that comes up)
  3. Type in: regsvr32 /u “%COMMONPROGRAMFILES%\Ahead\Lib\MediaLibraryNSE.dll”

This will remove Nero Scout.

Having other problems with your computer? Simply scan your computer for free to identify problem areas. Click here to start a free scan.

 

5 Quick and Easy Registry Tweaks to Speed up Windows XP and Vista

Remember how fast your computer used to run when you first got it?

Here’s a surprise: There’s no reason why it shouldn’t run as fast as that RIGHT NOW. All you have to know about is one part of your computer’s system called the Registry.

Did you know the registry is what every program uses whenever it needs to start up and continues to use it constantly while it is running. I’m talking sometimes hundreds of times per minute.

What’s worse is that every time a new program is installed or uninstalled or even runs on your computer, it leaves a stray piece of information in your computer’s registry. All these stray pieces “clog up” and slow down the registry until your computer runs MUCH SLOWER than it is meant to. This makes the Registry the most common “bottle-neck” that slows down your computer. How can knowing this make your computer faster?

Imagine there was a main pipe in your computer that EVERY single program, every single process had to go through. The more dirty and “clogged up” this pipe was, the slower your computer would run. Now, this is obviously an oversimplification, but it’s basically how your computer’s registry works, why it is the main cause of a computer’s slowness, and also the simplest and fastest thing to optimize if you want a lightning fast computer.

In this article I’ll show you five simple settings you can change to speed up your computer, but first…

Here’s How to Speed Up Your Computer With Just 2 Clicks (Really!)

I might be a “geek”, but I know most people aren’t. I understand that, so if you don’t want to mess around with your computers advanced settings at all, that’s fine with me.

However, I REALLY don’t recommend leaving your registry(which may be the most important part of your computer) as it is now. If it is like most of computers out there, it is full of useless “leftover information” that is slowing down your computer from the efficient machine it should be. At worst, it may be infested with viruses, adware and other malicious software!

Fortunately you can now scan for these errors without knowing anything about computers. There’s a program called RegistryFix I recommend to everyone, and use it on my own computer when I’m feeling too lazy to do the advanced stuff. Simply click here for a FREE scan.

You’ll get 80% of the benefits of the steps I describe below, with just one click. Go to RegistryFix.com and get a free scan.

Tweak One: Force Windows to Shut Down Faster

Have you ever clicked Shut Down expecting the computer to turn off immediately only to have to wait up to a minute (or more!) for it to finally turn off the lights? Believe it or not this is a common problem. This first tweak tells Windows to shut down the computer within 3000 milliseconds. That means that Windows gives programs on your computer 3000 milliseconds to finish up what their doing, after that it’s light out.

Here is the registry tweak:

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control]
“WaitToKillServiceTimeout”=”3000”

Note: Some websites give a value of 1000-2000 milliseconds for the timeout however this can cause problems with some applications so I recommend we use 3000 milliseconds.

Tweak Two: Prevent Fragmentation of MFT

The NT File System that Windows XP and Vista use has a database called the Master File Table (MFT). What this database holds is a record of every single file stored on your hard drive. As you can imagine this database can become quite large depending on how many files you add to your computer.

Windows, by default, sets aside a small amount of space for the MFT and allows that space to grow as the MFT does. Unfortunately this system is vulnerable to fragmentation. Since the MFT is used constantly by your computer system you want to keep it optimized. The following registry tweak simply increases the size of the space devoted to the MFT so that fragmentation does not occur if the MFT grows larger then it currently is.

Here is the registry tweak:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\FileSystem]
“NtfsMftZoneReservation”=dword: 00000002

Tweak Three: Speed up the Start Menu

The Windows Operating System has several nice interface effects, the windows minimize smoothly, they close with a fade, there are shadows under icons and generally everything looks nice. However, there are some effects that are useless. One of them attempts to make the Start Menu open more “smoothly” by delaying it a few moments. This tweak gets rid of the delay and opens the Start Menu instantaneously.

[HKEY_CURRENT_USER\Control Panel\Desktop]
“MenuShowDelay”=”0”

Tweak Four: Enable/Disable Thumbnails

See all those great looking icons in your Pictures folder? Pretty cool how they’re little mini-versions of the pictures that they represent, huh? For each picture/video on your computer Windows generates a miniature version to display in those icons. This tweak has two settings and I’ll explain both.

For those of you who have a lot of pictures and regularly browse folders containing many pictures  you want to enable Thumbnail caching. This will allow your computer to “memorize” the miniature versions of your pictures so that your computer does not have to regenerate those small versions every time you open the folder. This saves computer power for other tasks.

[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced]
“DisableThumbnailCache”=dword:00000000

For those of you who do not have a lot of pictures on your computer or don’t use the thumbnail view offered by Windows you can safely disable thumbnail caching in order to free up hard drive space and reduce fragmentation. Apply this Tweak:

[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced]
“DisableThumbnailCache”=dword:00000001

Tweak Five: Disable Indexing

The last tweak in this article is the one that will make the most difference. Windows XP and Vista both offer a Search program that you can use to find files on your hard drive. Having a search program in an Operating System is a great idea (and necessary for some users). However, the way Windows hopes to speed up searches is by running an “Indexing” program all the time in order to keep track of where most of the files on your computer are located.

This takes up a lot of processing power.

Simply disable the Indexing program and suddenly your hard drive and computer will operate much faster. You may notice that searching is a bit slower but, really, how many times have you actually used that Search tool? I’m willing to bet not many.

Here’s the tweak:

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WSearch]
“Start”=dword: 00000004

And:

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\cisvc]
“Start”=dword: 00000004

BONUS Tweak (Instant and No Technical Knowledge Required!)

After applying all five tweaks you should notice your computer running a little bit faster. However there is more to be done. The next step that I recommend you take is cleaning your registry. As you use your computer you are continually installing and uninstalling software cluttering your computer. Even if you use your computer just for the Internet the registry is still being accessed hundreds of times per minute.

If you notice that your computer is running slower then it used to it’s most likely because of all the junk that’s accumulated through the months and years and I encourage you to go ahead and scan your computer for FREE by clicking here: SCAN NOW.

 

How to Fix the Sony C:13:01 Error

Hi,
I am Madhu, I have sony cybershot digital camera model T7 and currently I am getting error C:13:01 error.I have changed memory stick however still I am getting the same. Please let me know what all are the options I need to try to fix the problem. appreciate your quick response.

Thanks and regards
Madhu

From what I know of this error it seems to occur because of a bad connection between the contacts of the memory card and of the camera. Because of this the fixes that I provide attempt to fix a possible contact issue. I recommend that you try the card in a memory card reader (you can buy one for very cheap) before attempting the fix in order to get your pictures off first.

Fix One:

Find yourself a pencil with an eraser at the end. Take the memory stick and rub the gold contacts gently with the eraser. Do this for 20-30 seconds until you’ve covered the entire surface of the contacts. Then insert the card into the camera, switch to “setup” mode and turn the camera on. This should turn off the error message.

The person I heard this fix from recommends you then format the card using the cameras format command.

Fix Two:

We will try to make sure that there is a proper connection between the contacts on the memory card and the camera. To do this remove and insert the memory stick several times over. Some recommend 5, 10, and even 20 times. The point is to get that card to align properly.

Fix Three:

Try to wiggle the card until the error disappears. This should restore contact.

Fix Four:

There are tabs on some cameras that guide the card into the slot. Bend these just the slightest bit towards each other in order to get the card to fit firmly into the slot. Be careful with this step in order to avoid breaking or otherwise damaging the tabs.

Having other problems with your computer? Simply scan your computer for free to identify problem areas. Click here to start a free scan.